Motorcycle Storage in Perth

Motorcycle storage is useful when you want to keep your bike but do not currently have a suitable amount of space for it at home. This can happen when moving property, downsizing, reorganising a garage or adding another motorcycle to your collection.

Seasonal riders may also prefer to move a bike elsewhere during periods when it is rarely used. Doing so can release garage space for another vehicle, household belongings or projects that would otherwise have to work around the motorcycle.

The benefit is flexibility. You do not need to sell or permanently relocate a bike simply because your circumstances have changed for a few weeks or months.

Winter storage is one of the most common reasons riders look for additional space. If you know your motorcycle will not be used for an extended period, storing it elsewhere can prevent it from occupying valuable room throughout the colder months.

Before placing the motorcycle into storage, follow the manufacturer’s guidance for longer periods of inactivity. The appropriate preparation may differ depending on the bike, its battery, fuel system and other mechanical components.

• Clean and dry the motorcycle before storage.
• Check the manufacturer’s advice for the battery.
• Follow appropriate guidance regarding fuel and fluids.
• Make sure tyres are at the recommended pressure.

Good preparation before storage will make it easier to bring the motorcycle back into use when your riding season begins again.

Preparation depends on how long the motorcycle will remain unused and on the requirements of the specific bike. A short stay may require relatively little preparation, while a longer period off the road deserves more careful planning.

Start by cleaning the bike and allowing it to dry fully. Dirt, road grime and moisture are better dealt with before the motorcycle is parked for an extended period rather than left on its surfaces.

Mechanical preparation should always follow the recommendations for your motorcycle. Battery care, tyre pressures, fuel and fluid levels can all be affected by long periods of inactivity, so consult the owner’s manual or obtain suitable professional advice where necessary.

A motorcycle adds another vehicle to an already busy moving day. Putting it into storage before the main move can simplify matters by allowing you to concentrate on furniture, boxes, keys and the transfer between properties.

It is particularly useful when your completion dates do not match, your new property is not ready or the motorcycle has no immediate parking space at the destination. You can deal with the bike separately once the rest of the move is complete.

• Move the motorcycle before the main removal day.
• Keep it elsewhere while waiting for access to a new property.
• Avoid overcrowding a new garage while unpacking.
• Collect the bike once your permanent parking area is ready.

This staged approach can be far simpler than trying to coordinate the motorcycle with every other part of the relocation.

Riding equipment can take up almost as much household space as the motorcycle itself once helmets, jackets, boots and other accessories are considered. Keeping associated items together can therefore be a practical way of clearing additional space at home.

Exactly what can be stored will depend on the storage terms and the nature of the item. Equipment should be clean and dry before it is packed away, particularly textiles and protective clothing that may otherwise retain moisture.

Keeping accessories organised also makes returning to the road easier. Labelled boxes or storage containers can help ensure that important items are easy to locate when the motorcycle is taken back out of storage.

The space required is determined by more than the motorcycle’s overall length. You also need enough width to position the bike comfortably and sufficient room to move around it where necessary.

Motorcycles vary considerably in dimensions. A lightweight commuter bike may require much less room than a large touring motorcycle fitted with panniers, a top box or other accessories.

Measure the motorcycle before choosing your space. Include any fixed or fitted equipment that increases its width or length rather than relying solely on the standard manufacturer’s dimensions.

Owners of multiple bikes often reach the point where available garage space becomes the limiting factor. Storage can allow you to keep an additional motorcycle without squeezing every machine into the same area.

This can be especially useful for classic motorcycles, occasional-use bikes and machines reserved for particular types of riding. A motorcycle does not have to be used every week to justify keeping it.

• Classic and heritage motorcycles.
• Occasional touring bikes.
• Second motorcycles used seasonally.
• Long-term restoration projects.

Separate storage lets you retain these bikes while keeping your everyday garage or parking area more manageable.

If you are leaving Perth for work, travel or another extended commitment, you may not want a motorcycle remaining unused at home for the entire period. Storage gives you another option while you are away.

It can also be helpful for people living in temporary accommodation where motorcycle parking is limited or unavailable. Rather than making permanent arrangements around a short-term situation, the bike can remain stored until your normal routine resumes.

Before leaving it for a longer period, prepare the motorcycle correctly for inactivity and make sure any servicing, maintenance or manufacturer recommendations are considered in advance.

A motorcycle that has been unused for a while should not automatically be treated as though it was ridden yesterday. The checks required will depend on the period of storage, the model and how the bike was prepared beforehand.

Basic inspection should include the motorcycle’s general condition, tyre pressures and any maintenance points recommended by the manufacturer. If the bike has been inactive for a prolonged period, further checks may be appropriate before riding it normally.

• Inspect the tyres and confirm correct pressures.
• Check relevant fluid levels.
• Reconnect or inspect the battery as appropriate.
• Follow the manufacturer’s pre-ride checks.

If you are unsure about the mechanical condition of a motorcycle after long-term storage, have it inspected by a suitably qualified motorcycle technician before returning it to regular road use.

Not every motorcycle needs to return to the road after a few weeks. Some owners require space for considerably longer because a bike is part of a collection, awaiting restoration or simply not needed at that point in their lives.

Longer-term storage can remove pressure to make a permanent decision. Selling a motorcycle because there is temporarily no room for it may be difficult to reverse later, particularly with an unusual, classic or sentimental bike.

If you plan to leave the motorcycle unused for an extended period, pay particular attention to correct mechanical preparation. Manufacturer recommendations and appropriate maintenance advice become increasingly important as the period of inactivity grows.